Stark Side Gear Slipstream Quick-Release Mounts: Solving the Rooftop Tent Removal Problem on a 4th Gen Tacoma

Ole Smoky • November 16, 2026 • 5 minute read
Stark Side Gear Slipstream Quick-Release Mounts: Solving the Rooftop Tent Removal Problem on a 4th Gen Tacoma

If you've ever owned a rooftop tent, you know the honeymoon phase wears off the first time you actually have to take it off your truck. What starts as an exciting overlanding upgrade can quickly turn into a dreaded chore involving crawling under crossbars, wrestling with mounting bolts, and losing skin on your knuckles. On this 4th Generation Toyota Tacoma Trailhunter build, that exact frustration led to a search for a better solution—and the answer came in the form of the Stark Side Gear Slipstream Option C quick-release rooftop tent mounts.



In this review and installation walkthrough, we break down how these quick-release mounts work, install them step-by-step on an OPENROAD PeakRoof LT V2 RTT and OPENROAD bed cap setup, and put them to the real-world removal test using a garage hoist. The result? A rooftop tent removal process that went from a wrench-heavy headache to something that takes less time than simply parking the truck under the hoist.



The Real Problem With Traditional RTT Mounting Hardware


Rooftop tents are heavy, bulky, and typically bolted directly to your crossbars using traditional hardware. That means every time you want to remove the tent—whether for a trip without it, seasonal storage, or swapping gear configurations—you're stuck underneath the truck with a ratchet, fighting awkward angles and tight clearances just to break the mounting bolts free.


For Tacoma owners running a 4th Gen Trailhunter with an OPENROAD PeakRoof LT V2 RTT, this wasn't just an occasional inconvenience. It was a recurring bottleneck that made full tent removal a dreaded, multi-step process even with a garage hoist already in place to handle the heavy lifting.



Why a Garage Hoist Wasn't Enough


A hoist solves the problem of physically lifting the tent off the truck, but it does nothing for the mounting hardware holding it down in the first place. The real bottleneck was always the connection point between the tent and the crossbars—not the weight itself. That's where the Stark Side Gear Slipstream mounts come in.



Meet the Stark Side Gear Slipstream Option C Quick-Release Mounts


The Slipstream Option C mounts are designed specifically to eliminate the bolt-by-bolt removal process traditionally required to separate a rooftop tent from crossbars. Instead of needing tools and crawling underneath the vehicle every time, these quick-release mounts allow for a fast, repeatable disconnect system that's built to handle the load requirements of a fully equipped RTT setup.


On this build, the mounts were installed to work with the OPENROAD PeakRoof LT V2 RTT and OPENROAD bed cap combination—a setup that demands secure, trail-rated hardware without sacrificing ease of use back at home or camp.



How the Quick-Release System Actually Works


Rather than relying on traditional nuts and bolts that must be fully removed and reinstalled each time, the Slipstream system uses a mechanism designed for quick engagement and disengagement. Once properly installed on the crossbars, the quick-release mounts allow the tent to be locked into place for driving and trail use, then released in a fraction of the time compared to stock hardware when it's time to take the tent off.


This is especially valuable for Tacoma owners who frequently switch between camping setups, need to access truck bed storage without the tent in the way, or simply want a faster path to seasonal storage.



Step-by-Step Installation on the 4th Gen Tacoma Trailhunter


The installation process was demonstrated in full on this Trailhunter build, showing exactly how the Slipstream Option C mounts integrate with the existing crossbar setup. Key steps included positioning the mounts correctly relative to the crossbars, securing the hardware to manufacturer torque specifications, and confirming proper engagement of the quick-release mechanism before loading the tent back on top.


As always with aftermarket mounting hardware, verifying your specific RTT and crossbar dimensions, load requirements, and garage clearance before ordering is critical. What works seamlessly on this OPENROAD PeakRoof LT V2 and OPENROAD bed cap combination may require different considerations depending on your own tent and crossbar setup.



Putting It to the Test: Real Removal Results


The true test of any quick-release system is how it performs in actual use—not just in theory. After installation, the mounts were put through a real removal test using the existing garage hoist setup. The result was a dramatic reduction in the time and effort required to separate the tent from the truck.


As stated plainly in the video: more time is now spent simply parking the truck underneath the garage hoist than is spent releasing the mounts and lifting the tent off. The hoist itself wasn't new or upgraded—the entire improvement came down to swapping out the mounting hardware.



Final Verdict on the Slipstream Quick-Release Upgrade


For Tacoma owners running a rooftop tent setup who have grown tired of the bolt-removal routine, the Stark Side Gear Slipstream Option C mounts represent a meaningful quality-of-life upgrade. They don't replace the need for a lifting solution like a garage hoist, but they do solve the actual bottleneck in the removal process—the mounting connection itself.


This review reflects a real, hands-on experience with this specific RTT, bed cap, and crossbar combination. If you're considering this upgrade for your own 4th Gen Tacoma or similar build, be sure to check your tent and crossbar dimensions, load ratings, and garage clearance to ensure compatibility before purchasing.



Where to Get the Stark Side Gear Slipstream Mounts


For those interested in simplifying their own rooftop tent removal process, the Slipstream Option C quick-release mounts are available through the link below.


Stark Side Gear Slipstream Quick-Release Tent Mounts



More Tacoma Mods and Resources


Looking for more 4th Gen Tacoma mods, camping upgrades, and overlanding builds? Check out more resources below:




Ready to see the full installation and removal test in action? Watch the complete breakdown below.



Watch the full video on YouTube

Talk about this build on Tacoma Planet

Running a similar setup, did it a different way, or got a question I didn't cover? Come hang out with other Tacoma owners in the forum thread.

Join the discussion

Related Posts

LexLand Tacoma Upgrades Tested: 9 Mods Reviewed on a 4th-Gen Toyota Tacoma
LexLand Tacoma Upgrades Tested: 9 Mods Reviewed on a 4th-Gen Toyota Tacoma

I installed a full lineup of LexLand's 4th-gen Tacoma mods — from door cubby lights and a bug grille screen to a dual-tone horn and heads-up display — to see which upgrades are genuinely worth it. Here's my honest, hands-on breakdown of what I'd actually keep on my truck.

Upgrade Your Tacoma Tailpipe to Trail Hunter Style: The Complete Guide
Upgrade Your Tacoma Tailpipe to Trail Hunter Style: The Complete Guide

Discover how to transform your Toyota Tacoma's exhaust with the Trail Hunter-style tailpipe upgrade. This guide covers the benefits, installation process, and why this simple mod is a must-have for off-road and overlanding enthusiasts.

CRITICAL Tacoma Buying Tip: Why Premium Paint Should Top Your Priority List
CRITICAL Tacoma Buying Tip: Why Premium Paint Should Top Your Priority List

Discover why premium paint quality should be a top priority when buying your next Toyota Tacoma. Learn how this often-overlooked factor impacts durability, resale value, and long-term performance both on and off the trail.